PUMP SYSTEMS aksindustries.com.au

1 CONSTANT PRESSURE PUMP SYSTEMS aksindustries.com.au2 Cascade providing innovative, reliable and sustainable constant pressure pumping systems. Desig...

Author:  Mabel Burns
0 downloads 0 Views 1021KB Size

CONSTANT PRESSURE

PUMP SYSTEMS

aksindustries.com.au

Cascade – providing innovative, reliable and sustainable constant pressure pumping systems. Designed specifically for cold water pressurisation and irrigation applications, these systems bring a combination of technology, experience and quality to provide our clients with a long term solution. Using highly efficient pumps and advanced control equipment, these systems have a smooth operation and eliminate water hammer which significantly reduces system fatigue and ongoing running costs.

Manufactured in Australia, Cascade pumpsets are installed in many and diverse applications. Our consultants can assist from providing initial design and advice right through to delivery, commissioning and on-going support.

CONTENTS Design3 Pumps4 Controls5 Options6 Testing7

2

CASCADE — FOCUSED ON EXCELLENCE 

aksindustries.com.au

DESIGN

Applications >> Mains Pressure Boosting >> Water Harvesting >> Irrigation >> Process Water >> Tank-fed Water Supply

Cascade Constant Pressure Systems are designed to provide ultimate reliability using only equipment that has been tried and proven over years. Our application consultants can assist with initial design to ensure your project has the most efficient and best long term solution. >> Up to 6 pumps in a single system >> Flows up to 180 L/sec >> Pressures up to 2500 kpa >> Stainless steel manifolds >> Pressure accumulator tanks >> Inlet and outlet isolation valves and non-return valve for each pump >> Variable or fixed speed control >> Factory performance testing

CASCADE — FOCUSED ON EXCELLENCE 

aksindustries.com.au

3

PUMPS

Cascade pumpsets utilise high-efficiency vertical multistage pumps on all pumpsets. the pump selection is based on the highest efficiency at the duty point, meaning reduced power consumption and increased hydraulic stability, delivering longer operational life.

Designed specifically for cold water boosting and irrigation applications, Cascade vertical multistage pumps provide a highly efficient, reliable pumping solution. The ‘steep’ performance curves typical to vertical multistage pumps, makes them simple to control providing smooth performance reducing water hammer and fatigue on the whole system. Cascade vertical multistage pumps are fitted with cartridge type mechanical seals and standard frame motors meaning most servicing can be done quickly and easily on site.

Flow

Up to 30 L/sec per pump

Pressure

Up to 2500 kpa

Temperature

Up to 120 °C

DUAL PUMPSET

Construction Shaft

Stainless steel (AISI431)

Impellers & other internals

Stainless steel (AISI304)

Casings

Cast iron

(stainless steel available on request)

TRIPLEX PUMPSET WITH JOCKEY PUMP 4

CASCADE — FOCUSED ON EXCELLENCE 

aksindustries.com.au

CONTROLS

Maximised efficiency System Protection Pump Life Communication

Having the right control system is the key to a smooth and efficient pumping system. Cascade variable speed systems incorporate variable frequency inverters for each pump to provide ultimate flexibility and back-up. Standard control features include: >> Constant pressure control >> Motor protection >> Loss of prime protection

Cascade pump-mounted variable speed controllers

>> High pressure system protection shut-down >> Anti-cavitation protection >> Automatic alternation of pumps >> BMS and Modbus compatible >> Over-current protection >> High/low voltage protection >> Pipe-burst protection. Pump variable frequency inverters communicate with the other pumps on the system to share the load and provide consistent and efficient performance. As the demand increases, the pump will speed up, and call on more pumps as required, slowing again when the demand reduces.

Cascade custom-built control system CASCADE — FOCUSED ON EXCELLENCE 

aksindustries.com.au

5

OPTIONS

Filtration Systems Enclosures Controls Complete Site Integration Dosing Systems Ultraviolet Disinfection

Due to Cascade’s modular design and our in-house fabrication ability, Cascade Constant Pressure Systems can be tailor built to meet your exact specific requirements. Whether it is a basic screen filter on a single pump system or a large multi-pump system complete with ultraviolet disinfection and remote data logging, Cascade will tailor the package to cover your needs. Our Vault pumpset enclosures are a neat, compact and robust solution for protecting pumpsets in external or public areas. They provide a fully packaged pump house with internal lighting, pipework and sound attenuation if required, delivering a one-piece packaged system.

Screen Filter 6

CASCADE — FOCUSED ON EXCELLENCE 

Telemetry

Vault Enclosure aksindustries.com.au

TESTING

TESTING CAPACITY >> Flows to 450 L/sec >> Pressures to 2500 kpa >> Hydrostatic pressure test to 80 bar >> Power consumption >> Noise pressure testing >> Temperature >> Efficiency

As an ISO9001 accredited company when you purchase a Cascade Constant Pressure System you can be confident that it will perform and meet your expectations. Each pumpset is rigorously tested on our purpose built testing facility. With highly accurate and calibrated testing equipment AKS Industries can provide you with full performance testing data for flow, pressure, power consumption, noise, temperature and efficiency. Our investment is your assurance.

CASCADE — FOCUSED ON EXCELLENCE 

aksindustries.com.au

7

191 Station Street Corio VIC 3214

CONSTANT PRESSURE

PUMP SYSTEMS 8

CASCADE — FOCUSED ON EXCELLENCE 

P 03 5274 1336 F 03 5274 9966 E [email protected] W aksindustries.com.au aksindustries.com.au

Life Enjoy

" Life is not a problem to be solved but a reality to be experienced! "

Get in touch

Social

© Copyright 2013 - 2019 DOKUMENTIS.COM - All rights reserved.